Beatrush Front Engine "Roll Stopper" Mount - 11-16 CR-Z, 09-13 Fit GE8, and 15+ Fit GK5

Not all Engine Mounts are created the same.

The Beatrush Front Engine "Roll Stopper" Mount for the 11-16 CR-Z, 09-13 Fit GE8, and 15+ Fit GK5 is a high quality performance enhancing mount. It's made from a single forged aluminum block and uses urethane bushings to improve traction and engine response by suppressing unnecessary engine movement. It is called the Engine Roll Stopper as it holds the motor to the subframe and stops the motor from "rolling" back and forth.

In the CR-Z and Fit market, Beatrush stands alone making high quality street and performance products like no one esle. This motor mount is made using 6061 Forged Aluminum which is then Gold anodized for corrosion resistance and machined to impressive tolerances. The Urethane bushing are made from high quality suppliers and are rated for at 90 Shore-A Durometer rating. The bushings are then reinforced with nickel-plated Aluminum inserts to ensure evenly distributed loads. Finally without sacrificing strength Beatrush machines center portion to reduce weight but maintains an I-beam structure for optimal strength.

This is guaranteed to be the single strongest urethane based (solid motor mounts are strongest but they're not practical or necessary for 99% of builds) Engine Roll Stopper/Front Motor Mount on the market. This will hold your high power/high torque street build and most drag queens.

***Manual Transmissions only***

Applications:

• Honda CR-Z [ZF1 / ZF2] (2011, 2012, 2013, 2014, 2015, 2016)
• Honda Fit [GE8] (2009, 2010, 2011, 2012, 2013)
• Honda Fit [GK5] (2015, 2016, 2017, 2018, 2019)

Features

Forged Gold-Anodized Aluminum Body
Machined to low weight and optimal strength
90A Urethane Bushing balance of strength and flexibility
Replaces OEM front motor mount
Weighs a mere 1.852 pounds (0.097 lbs lighter than OEM)
Guaranteed to remove wheel hop and improve traction
Increased interior vibration once installed
Beatrush logo engraved on both sides
Made by hand in Yokohama, Japan

Extended Information

Type: Motor Mount / "Engine Roll Stopper"
Location: Front Lower Subframe mount
Material: 6061 Forged Aluminum & Urethane Bushings
Bushings: 90 [Shore-A durometer]
Finish: Gold Anodized
Subframe mounts: Nickel Plated Aluminum inserts for zero bolt stripping
Weight: 840 [grams] (OEM weighs 894 g)
Notes: Interior Vibration will increase
Warranty: Manufactures Defect