BC Racing BR Coilovers for 2014- Mini Cooper (w/o DDC) (4mm Wheel Spacer Included) (BCR.T-05-BR)
Regular price
$1,245.00 USD
$1,195.00 USD
Ready To Ship!
The Mini Cooper F56 with Dynamic Damper Control (DDC) uses a small stepper motor to allow for minute damping adjustments to OEM suspension. Before installing our BC Racing Coilover Kit you will disconnect this stepper motor from the OEM suspension but it is not necessary to remove the stepper motor from the vehicle. We have designed a kit to accommodate the stepper motor although it will no longer function. There are a few very subtle differences in our Mini Cooper F56 Coilover kits for DDC/without DDC models in order to match the OEM damper shaft top pin size. Our front piston rod top pin shaft for the DDC model is a few millimeters larger than the non-DDC model. The reason for this is because BC Racing makes every attempt possible to match the OEM part sizes, even the piston shaft top pin diameter.
Since the F56 with DDC has a larger diameter top pin size to accommodate the OEM damping control, our T-04-BR kit follows the same specs. In the front of the F56, this isn't really a problem since camber plate top mounts come standard, but in the rear, the larger diameter top pin is needed to fit through the OEM upper strut tower hole. For a Mini Cooper without DDC, you would need to use the BC Racing T-05-BR kit. The T-05-BR kit uses a narrower rear top pin to allow it to pass through the OEM upper strut tower mount. If you were to try and put a T-04-BR kit on an F56 without DDC, the rear shock would not fit. The same goes for putting a T-05-BR kit on an F56 with OEM DDC, the rear shock would not fit.
PLEASE NOTE
- Pictures may differ in the actual product
- Please be sure to confirm whether your Mini Cooper F56 has OEM DDC or not before placing an order for a kit
APPLICATION
- Mini Cooper (2014)
FEATURES
- Highly Customizable
- Mono-Tube Shock Design
- Linear Piston And Damping Curve
- Height Adjustment Independent Of Spring Compression
- 30-Clicks Of Simultaneous Compression/Rebound Adjustment
- Front Camber Plates Standard On Applicable Kits
- Rear Camber Plates Available For Applicable Kits
- Custom Spring Rates And Swift Springs Available
- Custom Valving Or Valving Paired For Custom Spring Rates
- Fully Rebuildable
WARRANTY
- 1-Year Warranty Against Manufacturers Defect
Customer Reviews
Customer Questions
RETURN & CANCELATION POLICY | INTERNATIONAL DUTIES AND TAXES
In stock, non special order items can be returned within 30 days of the product arriving to your house or place of work.
Returns will NOT be accepted on Clearance Items, Final Sales, Special Orders, Opened, Installed, Incomplete, or Otherwise Used Products. In order to initiate a return, an RMA number must be requested and approved via e-mail.
All returns will be subject to a 20% restocking fee minus complete shipping cost (roundtrip).
Any processed orders that have not shipped will incur a 6% cancelation refund fee unless the product was not available to ship within a timely manner. No fee will be incurred if used as store credit.
For complete details on our return policy, please see our Help and FAQ link under HELPFUL INFO.
INTERNATIONAL DUTIES AND TAXES
All international orders outside of the USA are subject to duties and taxes per your countries jurisdiction and determined by customs.
Kami Speed serves the right to ship using an alternative method if we see it fit, in order to expedite shipping and reduce your rate depending on product value.
