What size lug nuts fit the Honda Civic Type R?

Billy Ono

With most Sport Compact Japanese makes and models using M12x1.25 or M12x1.50 thread pitch lug nuts.  One would assume that the FK8 Civic Type R uses 12x1.50 lug nuts like all of its cousins do...S2000, NSX, RSX, Integra, CRZ, etc.

Nope! Not this monster.  Unlike its cousins, the CTR uses 14x1.5 lug nuts.  Which has to do with the 5x120 bolt pattern Honda adapted for this car.  

Luckily we carry a good amount of 14x1.5 lug nuts for aftermarket wheels.  Which you will need to use as the OEM one will not sit properly on your aftermarket wheel.

If you're in the market for lug nuts for your FK8.  We recommend starting with any of these:

 

Monster Open Lug Nut 20 Set Black 14x1.50 for Civic Type R

MONSTER OPEN LUG NUT 20 SET BLACK 14X1.50 FOR CIVIC TYPE R

WHEEL MATE MONSTER LUG 35MM SHORT LUG NUT SET OF 20 - CHROME 14X1.50

MONSTERLUG 630-H 63MM STEEL RED LUG NUTS 14X1.50

WHEEL MATE MONSTER OPEN END LUG NUT SET OF 20 - RED 14X1.50

 

McGard Black Chrome Lug Nuts & Locks set of 24 for 14x1.5

MCGARD BLACK CHROME LUG NUTS AND LOCKS - 14X1.5

 

McGard Black SplineDrive Lug Nuts & Locks for 14x1.5

MCGARD BLACK SPLINEDRIVE LUG NUTS AND LOCKS - 14X1.5

And if you're looking for additional styles.  You can view all the lugnuts we carry for your Honda Civic Type R on the link below.

Honda Civic Type R LugNuts

Comment (1)

Ivan B.

Leave a comment

Please note, comments must be approved before they are published.