GrimmSpeed 08-16 Mitsubishi Evo X Boost Control Solenoid (grm057033)
In Stock. Pre-order.
Ships in 6+ weeks
The GrimmSpeed™ Mitsubishi EVO Boost Control Solenoid is designed to work with your factory computer (requires tuning). It will not reduce the life of your factory computer because it is designed to draw the same amount of power as the factory BCS but flows better and reacts faster. It plugs in and requires no splicing or soldering of resistors. With the included bracket you can bolt it in, plug in the connector, and start tuning for fast boost response, increased boost pressure, and free up lots of power. Planning on returning the car to stock? Just reverse installation.
Why is it a must to run an Electronic BCS over a Manual Boost Controller?
A Manual Boost Controller allows you to run higher than stock boost levels by preventing the wastegate from opening at its rated pressure. It does a great job at this but if a boost is available under the MBC setting it will give you that full boost. So for instance, you set your MBC to 18psi because from 3000-6000rpm that's what you want. But then say you get detonation with 18psi when you are at 7000rpm unless you are below 16psi. With an MBC, you do not have this control so you are forced to run 16psi through the entire rev range. With an electronic boost controller, you could run 18psi from 3000-6000 and 16psi at 7000rpm because you can tune the boost map in the ECU which will allow you to run the maximum amount of boost at every given rpm. This gives you more power throughout the range and better control. Revolutionizing the EVO boost solenoid market, we have created model-specific install brackets that allow you to directly fit our Boost Solenoid into your EVO for a factory fit. No more Zip-tying! We give you the factory fitment you have been waiting for. Staying with the OEM fitment theme, our Boost Solenoid uses an EVO-style wiring harness so you can simply unplug your OEM solenoid and plug ours in. No more cutting the OEM wiring and crimping wires together! Also new to the EVO boost solenoid market, we have used ultra low-profile hose fittings to keep the unit as small and clean as possible. The hose fittings are nickel-plated brass so you don't have to worry about them snapping off like the plastic hose fittings!
- Mitsubishi EVO X (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016)
- Get into Boost Much Quicker (Flows 10% more than the competition)
- Plug and Play into OEM Harness (no splicing wire like other BCS!)
- Factory Fit with a clean install
- Works Safely with Factory EVO ECU (custom coil to match ECU)
- Nickel-Plated Fittings as this is Built To Last (not the easily breakable plastic fittings!)
- Easy to Install and Very Easy to Tune
- The Only Direct Bolt-IN BCS for EVO
In stock, non special order items can be returned within 30 days of the product arriving to your house or place of work.
Returns will NOT be accepted on final sales, special orders, opened, installed, incomplete, or otherwise used products. In order to initiate a return, an RMA number must be requested and approved via e-mail.
All returns will be subject to a 20% restocking fee minus complete shipping cost (roundtrip).
Any processed orders that have not shipped will incur a 6% cancelation refund fee unless the product was not available to ship within a timely manner. No fee will be incurred if used as store credit.
For complete details on our return policy, please see our Help and FAQ link under HELPFUL INFO.