Snow Performance Stg 2 Boost Cooler F/I Prog. Water Injection Kit (SS Braided 4AN Fitting) - No Tank (SNO-210-BRD-T)
Unlock 50-70 horsepower on your boosted vehicle while lowering air temperatures by up to 100 degrees! Increase the octane of your pump petrol by 25 points and create more power with a cooler operating motor! For all forced induction applications (Supercharged/Turbocharged), the Snow Performance Stage 2.5 Boost Cooler water-methanol injection kit is available. Stage 2.5 employs the progressive VC-50 controller (52mm Gauge), which injects more or less water-methanol proportionally to boost pressure. Start and full points for engagement and delivery curve are adjusted to meet the engine requirements. Proportionally injecting based on boost pressure ensures the correct distribution of water-methanol and allows for cooling and performance gains throughout a wide range for better drivability. Especially useful for removing 100% of carbon buildup on valves in direct injected engines. Recommended for all street/strip-driven forced induction vehicles with a turbo or centrifugal supercharger (Procharger/Vortech) that require cooling over a wide temperature range. The VC-50 (ISO 9001 Manufactured) controller combines the capability of a boost gauge and a water-methanol controller. A brilliant 7-color O-LED panel (Blue, White, Red, Yellow, Orange, Purple, and Green) displays boost, percentage of injection, low level, secondary stage activation, prime button, and system error codes directly on the screen. You can customize the color of the controller to match your OEM gauges or mix and match up to two colors!
This kit employs the market's only OEM-approved water-methanol injection pump, which features a special heat flange, twin seals, and custom motor winding to run cooler and longer than the competition. The Extreme Environment 300 PSI UHO pump is built to withstand the elements, with O-ring connections that are sealed and potted to prevent moisture from entering the pump's internals. Compare this to pumps that have a "sleeve" around the pump. These sleeves will trap heat and hold moisture around the pump unit, causing corrosion and reducing pump life.
To ensure years of ongoing usage, Stage 2.5 comes equipped with 100% methanol-resistant components made of stainless steel, nickel plating, EPDM, and hard anodizing. Combine this with new Snow Performance ACU-SEAL compression fittings for leak-free operation even when using 100% methanol. The Stage 2.5 Boost Cooler will make the induction charge colder, and denser, and enhance 91-octane fuel to 116-octane race gas levels, providing full power all the time whether you're running a supercharger, turbo, or high-compression motor.
APPLICATIONS
- Forced Induction vehicles using a Turbo or Centrifugal Supercharger (Procharger/Vortech)
FEATURES
- U.S.A. Made
- Adjustable Progressive Water Methanol Engagement & Monitoring
- Digital Boost Reading (1-50 PSI)
- Recommended For Street Driven Turbo and Centrifugal Supercharger Applications
- Supports 1,000+ HP
- 100% Methanol Resistant (Stainless Steel, Nickel Plating, Hard Anodizing, EPDM)
- Snow Performance Hyper-Sonic Water Methanol Nozzle
- Snow Performance ACU-SEAL Water Methanol Compression Fittings
- Snow Performance OEM Approved Extreme Environment 300 PSI UHO Water Methanol Pump
- Snow Performance Running "S" Engraved Low Profile Nozzle Holder
- Snow Performance Running "S" Engraved Low Profile High Flow Check Valve
To provide faster delivery and turn around time; Kami Speed ships products out from different warehouses throughout the United States. Usually averaging 1-4 business days for processing prior to shipping.
Depending on the package, we ship using different carriers according to the item's location, content, and size.
Freight truck & international items, will require up to 7 business days to ship due to size and logistics.
All orders made after 3:00pm ET will be processed the next business day.
Unless otherwise noted as "In Stock" with qty amount. Pre-Orders, Special orders, & Made to order items have an estimate of 5+ weeks for USA made parts and 10+ weeks for JDM/ Overseas parts. Please check with us for exact ETA as it will vary by brand and item.
Orders over $500 will ship insured and over $1,000 with signature and insurance in order to guarantee delivery. Orders over $1000 may not be able to ship to a different address not listed as the billing address or confirm payment address from the form of payment used. Orders with suite numbers, different billing, or apartment numbers will require signature if valued over $200.
Delivery Inspection & Damage Claims
Large, oversized, fragile, and performance parts must be inspected immediately upon delivery and before installation. Damage, missing parts, incorrect items, or cosmetic concerns must be reported within 3 business days of delivery with photos of the product, outer box, inner packaging, and shipping label.
Please keep all packaging until the item has been fully inspected. Claims may be denied if the item has been installed, mounted, modified, test-fitted, used, reported late, or if the packaging has been discarded.
All international orders outside of the USA are subject to duties and taxes fees per your countries jurisdiction and determined by customs. Refusal to pay duties/taxes fees prior to delivery will have the product sent back to us. This will be treated a standard return and all fees including original and refusal shipping fees will be deducted from original amount.
Kami Speed serves the right to ship using an alternative method if we see it fit, in order to expedite shipping and reduce your rate depending on product value.
Processing and logistics on in stock international orders will take up to 7 business days to process & ship as sometimes we only have 1 international pickup a week.
In stock, non pre-orders or special order items can be returned within 30 days of the product arriving to your house or place of work.
30 days, unused. Refund = item price minus 20% restocking fee. Original shipping is non-refundable. Return shipping (if we provide label) is also deducted.
Returns will NOT be accepted on Clearance Items, Final Sales, Special Orders, Pre-Orders, Opened, Installed, Incomplete, or Otherwise Used Products. In order to initiate a return, an RMA number must be requested and approved via e-mail
Any loan orders will have a 10% cancelation fee to cover the loan processing fees or 3rd party merchant fees. No fee will be incurred if used as store credit.
For complete details on our return policy, please see our Help and FAQ link under HELPFUL INFO.
WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle. For more information go to www.P65Warnings.ca.gov/passenger-vehicle.
Snow Performance Stg 2 Boost Cooler F/I Prog. Water Injection Kit (SS Braided 4AN Fitting) - No Tank (SNO-210-BRD-T)
